![]() |
Brand Name: | KOOFILM |
Model Number: | K149 |
MOQ: | 1 Rolls |
Payment Terms: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
Our Pure White TPU Car Color Protection Film combines the durability of premium paint protection film (PPF) with the aesthetic appeal of a flawless white vinyl wrap. This innovative hybrid solution provides superior protection against scratches, UV rays, and environmental damage while delivering a showroom-quality white finish. Made from high-grade thermoplastic polyurethane (TPU), it offers long-lasting color stability and self-healing properties for ultimate vehicle protection.
Feature | Specification |
---|---|
Material | Premium Thermoplastic Polyurethane (TPU) |
Thickness | 7.5 mil (190 microns) |
Finish | High Gloss (Pure White) |
Self-Healing | Yes (heat-activated) |
UV Protection | 99% UV block |
Adhesive Type | Air-release, low-tack adhesive |
Durability | 8 years |
Applications | Full wraps, partial panels, accents |
1. Ensure the vehicle has not undergone ol heating, waxing, etc, within one month in a ventlated area.lf needed, performa test first.
2. Inspect exterior components for abnommalities and confim details with the customer.
3. Remove handles, trims, emblems, or other attachments that may interfere with the installation
1. Avoid washing the car to prevent water residue or overheating at edges
2.Clean large areas with a specialized automotive cleaner.
3. For sticky residues, use a lint-free cloth with 70% alcohol and apply pressure while wiping Installation
Surface Preparation
1. Ensure surfaces are dry, smooth, and free of scratches, Use clean microfiber cloths to avoid lint or dust, Wipethoroughly to prevent rust spots.
2. Replace edge films for larger panels if necessary
Squeegee Selection
1. Use a hard plastic-edged squeegee wrapped with soft felt or a soft-tip squeegee.
2. Spray soapy wrater on the film adhesive to reduce friction, minimize bubbles, and avoid damaging the self-healinglayer.
Bubble Removal
1. Work from the center outward with the squeegee to remove air bubbles
2. Avoid leaving gaps, as trapped air may cause adhesive marks, Use a mist of water and soap for large surfaces ike ahood if you have difficulty to install
Front/Rear Bumper Installation
1. Two technicians are reguired: one to stretch horizontally, the other to secure vertically.
2. Ensure the film does not exceed 1.5x the original bumper length to prevent peeling or overheating (risk of "bursting")
Narrow Areas (A-Pillars)
1. Select appropriately sized film for narrow sections,
2.Avoidd overapping seams to prevent adhesive marks
Edge Trimming
1. Trim edges neatly, Use a heat gun to soften the film, then press edges into seams with a hard plastic roller.
2. Heat edges thoroughly with the heat gun and apply firm pressure to seal.
1. lf the wrap color differs from the original, reinstall handles and trims carefully to avoid heat damage from the heat gun.
2.Reattach all removed components (handles, trims,emblems).
✔ Pure White Aesthetic – Provides a clean, uniform white color that enhances your vehicle's appearance.
✔ UV-Resistant Coating – Prevents yellowing and fading, maintaining color vibrancy for years.
✔ Glossy & Smooth Texture – Mimics factory paint with a deep, reflective shine.
✔ Self-Healing Technology – Minor scratches and swirl marks disappear with heat (sunlight or warm water).
✔ 7.5mil Thickness – Heavy-duty defense against rock chips, road debris, and abrasions.
✔ Hydrophobic & Stain-Resistant – Repels water, dirt, and contaminants for easy cleaning.
✔ High Elasticity – Conforms seamlessly to complex curves, edges, and body contours.
✔ Tear-Resistant – Reinforced TPU structure prevents cracking during installation.
✔ Breathable Adhesive – Allows bubble-free application and easy repositioning.